Metal detection integrated in frozen bun line

Friday, 20 November, 2026 | Supplied by: Eriez Magnetics Pty Ltd

Metal detection integrated in frozen bun line

Frozen bakery processes present unique inspection demands, requiring processors to balance production speed, food safety regulations and operational efficiency.

Eriez has partnered with system integrator Artypac Automation to integrate metal detection into a bakery manufacturer’s high-volume frozen bun line. Using PrecisionGuard X8 Metal Detectors, the manufacturer now runs approximately 350 buns per minute while maintaining contaminant detection.

The application required consistent detection of ferrous, nonferrous and stainless steel contaminants, along with equipment that could withstand thermal shock and high-pressure washdowns. The solution also needed to fit the existing automated line and maintain throughput without adding complexity for operators.

Eriez and Artypac selected the PrecisionGuard X8 Metal Detectors and fine-tuned sensitivity settings and product parameters to match production conditions.

Image: Supplied

“By involving Eriez early in the project and testing the system against actual operating conditions, we were able to build a solution that fit the line rather than forcing the line to fit the equipment,” said Gabriel Laurin, President of Artypac, which is based in Quebec.

Integrated into the packaging line at a critical control point, the system automatically rejects suspect product while allowing acceptable product to continue downstream uninterrupted.

The metal detector combines high-sensitivity detection with a touchscreen interface, automatic set-up, and product-learning features. It is constructed to support demanding cleaning requirements, while built-in data storage and logging capabilities support traceability and audit readiness.

“Eriez works closely with partners like Artypac to design and refine systems for each unique application,” said Emmett Keim, Global Product Manager, Inspection Systems, at Eriez. “That collaboration helps ensure the metal detection solution is matched to the product, the line and the customer’s operational goals.”

Top image used for illustrative purposes only. Image credit: iStock.com/andresr

Online: www.eriez.com
Phone: 03 8401 7400
Related Products

Steinecker Botec F1 and ILTIS process control systems

The Steinecker Botec F1 and ILTIS process control systems are designed to enable companies to...

Evoguard H1CP series hygienic pumps

Evoguard is introducing a new generation of mash and wort pumps designed for applications with...

EXAIR EFC Electronic Flow Control for compressed air

EXAIR's EFC Electronic Flow Control has been redesigned to make it easier to minimise...


  • All content Copyright © 2026 Westwick-Farrow Pty Ltd