Flexicon Tip-Tite high-lift box/container tipper

Wednesday, 16 February, 2011 | Supplied by: Flexicon Corporation (Australia) Pty Limited


The Tip-Tite high-lift box/container tipper discharges dust free into vessels 183 to 305 cm above the plant floor.

The tipper allows boxes and other containers to be loaded at floor level, sealed against a discharge hood, elevated and tipped, mating the hood outlet to a gasketed inlet port fitted to any receiving vessel.

The unit accommodates boxes from 915 to 1220 mm on a side and 990 to 1117 mm overall height.

The container platform is raised by a single hydraulic cylinder, creating a dust-tight seal between the top edge of the container and the underside of the discharge hood. A second hydraulic cylinder raises the platform-hood assembly vertically, before tipping it to a motion-dampened stop at 60° beyond horizontal, causing the vertically oriented hood outlet to mate with the receiving vessel’s horizontally oriented inlet port.

A pneumatic or manual slide gate valve prevents material flow until the discharge cone has been properly seated and allows discharging at controlled rates.

The tipper is constructed of carbon steel with stainless material contact surfaces and is also available in all-stainless construction finished to food, pharmaceutical or industrial standards.

Optional receiving hoppers configured with the company’s mechanical or pneumatic conveyors are available to transport discharged material to any plant location.

Online: www.flexicon.com.au
Phone: 07 3879 4180
Related Products

Flexicon Twin Tilt-Down flexible screw conveyor on mobile base built to 3-A standard

New from Flexicon is a Twin Tilt-Down Flexible Screw Conveyor system with dual hoppers on a...

NORD LogiDrive Advanced and LogiDrive Basic drive solutions

The NORD LogiDrive  solution is an energy-efficient, service-friendly and standardised...

Mixquip Series 620-3 High Shear Powder Liquid Mixer

Incorporate powders into liquids faster, more efficiently and cost-effectively with Mixquip's...


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd