Dynapumps Dynavac Central Vacuum Systems

Wednesday, 01 February, 2017 | Supplied by: Dynapumps

Dynavac central vacuum systems2

Dynapumps’ Dynavac Central Vacuum Systems are manufactured and tested in Australia.

Multiple Pump configurations are available as stacked modules to allow for easy expansion as requirements increase. The receiver complies with AS 1210 and can be mounted in a horizontal or in a vertical position.

Dual bacterial filters can be fitted or supplied for remote installation. A second check valve, with vacuum pressure test cock, backs up the internal check valve to prevent reverse rotation. A gas ballast valve is fitted as standard to remove contaminants.

The AS 3000 electrical control panel features reliable digital vacuum transducers. The liquid-filled gauge has an isolating valve for easy replacement, while the receiver isolation valve allows for servicing of the vessel without interrupting vacuum supply. A low level oil switch indicates when oil is low, and the removable spin-off oil filter enables quick servicing. A pressure gauge indicates when filters need replacement.

Dynapumps supplies 3D drawings to ensure easy visualisation and accurate dimensioning for the installation of the finished system. Service and repairs are also available on-site or in the company workshop.

The systems are designed, constructed and tested to comply with AS 2896-2011 Medical Gas System – Installation and Testing of Non Flammable Medical Gas Pipeline Systems.

Online: www.dynapumps.com.au
Phone: 08 9424 2000
Related Products

tna roflo 3 turnkey blending system

The roflo 3 turnkey vibratory motion blending system by tna combines speed, continuous vertical...

Marel I-Cut 130 PortionCutter

The I-Cut 130 PortionCutter by Marel is suitable for cutting fresh, boneless fish into portions...

Electro-Chemical Devices S80-T80 modular liquid analysers

ECD's S80 sensors measure pH, ORP, pION, dissolved oxygen, turbidity, conductivity and...

  • All content Copyright © 2017 Westwick-Farrow Pty Ltd