Compressed Air Australia EXAIR Cabinet Coolers

Sunday, 01 October, 2017 | Supplied by: Compressed Air Australia Pty Ltd


Sccetcpr 3mb

With no moving parts to wear out, EXAIR Cabinet Coolers are virtually impervious to hostile environments and well suited to use in food processing, wastewater treatment, chemical processing, paper manufacturing, steel mills and power generation.

EXAIR’s complete line of low-cost Cabinet Coolers are UL Listed and CE Compliant. They mount in minutes through an ordinary electrical knockout and feature thermostat control to minimise compressed air usage.

Type 316 Stainless Steel Cabinet Coolers for NEMA 4X (IP66) applications are available for heat loads up to 5600 Btu/h. They resist harsh environments and are suitable for food and chemical processing, pharmaceutical, foundries, heat treating and other corrosive environments.

NEMA 12 (IP54) Cabinet Coolers for large heat loads up to 5600 Btu/h are suitable for PLCs, line control cabinets, CCTV cameras and modular control centres. They mount top, side or bottom and the enclosure remains dust-tight and oil-tight.

NEMA 4 and 4X (IP66) Cabinet Coolers for large heat loads up to 5600 Btu/h are suitable for PLCs and modular controls. The enclosure remains dust-tight, oil-tight and splash resistant. They are suitable for indoor or outdoor service and in wet locations where coolant spray or hosedown can occur.

The Mini NEMA 12, 4 and 4X Cabinet Coolers for small heat loads up to 550 Btu/h are suitable for control panels, relay boxes, laser housings and electronic scales. They measure 127 mm high and mount top, side or bottom. The enclosure remains dust-tight and oil-tight (NEMA 12) and splash resistant (NEMA 4 and 4X).

High Temperature Cabinet Coolers for NEMA 12, 4 and 4X applications are available for heat loads up to 5600 Btu/h. They are suitable for ambients up to 93°C and can be mounted near ovens, furnaces and other hot locations.

NHP Cabinet Coolers keep a slight positive pressure on the enclosure to keep dirt from entering through small holes or conduits. They use only 1 SCFM in purge mode and are suitable for heat loads up to 5600 Btu/h (NEMA 12, 4 and 4X).

For further information: https://www.caasafety.com.au/products/exair/cabinet-coolers.

Online: www.caasafety.com.au
Phone: 08 8983 3999
Related Products

Zeulab Lab2Go allergen test kit

Zeulab's Lab2Go Allergen Test Kit is a useful and easy tool for verifying Good Manufacturing...

GEA SmartPacker TwinTube C

The GEA SmartPacker TwinTube C achieves up to 500 pillow bags/min. It handles products smoothly,...

KROHNE OPTISENS TSSX000 TSS sensors and MAC 300 analytical transmitter

With the OPTISENS TSS 3000 and 7000 and MAC 300, KROHNE adds two total suspended solids (TSS)...


  • All content Copyright © 2017 Westwick-Farrow Pty Ltd