JVL NEMA23 integrated stepper motors

Wednesday, 30 November, 2016 | Supplied by: Motion Technologies Pty Ltd


JVL Industri Elektronik A/S has updated its NEMA23 integrated stepper motors.

The integrated motors have an RS485, an optional CANopen or an industrial Ethernet interface as well as an easy programmable motion controller. The high step resolution of 409,600 steps per revolution results in smoothness and silent running.

Users can choose between top or rear end-mounted M12 connectors. The MIS23 motors come in three different sizes and two different motor types. Three have standard high-torque stepper motors: the MIS231 with 1.1 Nm, length 102 mm; the MIS232 with 1.6 Nm, length 122 mm; and the MIS234 with 2.5 Nm, length 170 mm.

Two versions have ultrahigh-torque stepper motors with 40% higher motor torque: the MIS231 with 1.6 Nm, length 102 mm; and the MIS232 with 2.5 Nm, length 122 mm.

The motors can be operated as stand-alone units or controlled from a PLC or PC. The eight I/Os can be individually configured as digital input, digital output or analog input.

The series allows connectivity to all industrial Ethernet interfaces such as Profinet, EtherCAT, Powerlink, EtherNet/IP, Modbus TCP and SERCOS III.

The integrated stepper motors in the MIS series are also available with wireless Bluetooth, ZigBee or WLAN.

Online: www.motiontech.com.au
Phone: 02 9524 4782
Related Products

Flexicon Twin Tilt-Down flexible screw conveyor on mobile base built to 3-A standard

New from Flexicon is a Twin Tilt-Down Flexible Screw Conveyor system with dual hoppers on a...

NORD LogiDrive Advanced and LogiDrive Basic drive solutions

The NORD LogiDrive  solution is an energy-efficient, service-friendly and standardised...

Mixquip Series 620-3 High Shear Powder Liquid Mixer

Incorporate powders into liquids faster, more efficiently and cost-effectively with Mixquip's...


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd